Valves Manufacturers In India [Top Manufacturers]

. 7 min read
Valves Manufacturers In India [Top Manufacturers]

Valves are one of the most critical components of any fluid related system. They are essentially devices that are used to regulate the flow of fluids by opening or closing pathways in piping systems.

Because of their functionality, valves are found in virtually every industrial process like water and sewage treatment, mining, electricity production, agricultural irrigation, oil, gas, and petroleum processing, food processing, chemical and plastic manufacture, and many more.

As with any industrial device, the quality can vary a lot depending on the manufacturing process used and especially the company that is producing the product.

Keeping that in mind, we at OkCredit have compiled a list of the top valve manufacturers in India so that you can understand which is the best valve manufacturer before you make a purchase.

Let’s jump right in…

Valve Manufacturers in India

1. L&T Valves Ltd


Operating Revenue Range(FY 2020)


Authorised Capital


Over INR 500 cr

Public, Unlisted

INR 75 cr

HQ location - Ballard Estate, Mumbai, Maharashtra

Products -

  • Gate, Globe & Check Valves
  • Trunnion-mounted Ball Valves
  • Triple-offset Butterfly Valves
  • Plug Valve. DBB Plug Valves
  • Knife Gate Valve
  • Piston Valves
  • Dual-plate Check Valves

The largest manufacturer of valves in India by market share, L&T is trusted in the industry for over 6 decades. They design their valves through in-house specialists using industry requirement analysis, allowing them to constantly top the list of control valve manufacturers and ball valve manufacturers in India.

The firm has built a reputation for producing high-quality valves for oil and gas, electricity, petrochemicals, chemicals, and fertiliser industries. Larsen and Turbo create valves utilising advanced design approaches such as state-of-the-art 3D design, simulation, and analysis tools.

With over 21 billion USD invested in the research and development of industrial valves, they are credited with innovating a vast slew of valve technologies like Smart Valves and Cryogenic & Low Emission Valves.

2. Virgo Valves Pvt Ltd


Operating Revenue Range(FY 2020)


Authorised Capital


Over INR 500 cr

Private, Unlisted

INR 62 cr

HQ location - Sir P.M Road, Fort Mumbai, Maharashtra

Products -

  • Butterfly Valves
  • Check Valves
  • Knife Gate Valves
  • Floating Ball Valves
  • Angle Valves
  • Lined Valves
  • Triple Offset Valves
  • Trunnion Ball Valves

Virgo is a privately held corporation that services a variety of markets throughout the world, including oil & gas, electricity, and mining sectors.

Having operated for nearly 30 years as one of the leading valve manufacturers in India, they were acquired by Emerson and have ever since served as a subsidiary of this MNC.

With a slew of product offerings like automated and manually controlled quarter-turn valves, severe-service valves etc. for their customer sectors, they provide a very wide range of solutions.

Virgo valves manufacture a variety of flow-control ball valves, including floating ball valves, butterfly valves, actuated valves, trunnion mounted ball valves and stainless-steel ball valves.

In addition to the flagship offerings of control, ball and butterfly valves, they also offer automation systems.

3. Oswal Valves Ltd


Operating Revenue Range(FY 2020)


Authorised Capital


  INR 100-500 cr

Public, Unlisted

INR 20 cr

HQ location - Gandhinagar, Gujarat

Products -

  • Gate Valves
  • Globe Valve
  • Check Valve
  • Cryogenic Valve
  • Pressure Seal Valve

Oswal Valves are one of the subsidiaries of Oswal Industries and are considered to be a specialised manufacturer of gate, globe and check & ball valves.

Based in India, they have the largest single-location integrated manufacturing facility in the nation, with over one lakh square meters at their disposal.

This steel foundry is dedicated to the production of its flagship products and essentially makes sure that there is vertical integration in how the company manufacturers its products.

This is a huge advantage for Oswal and the resulting quality control is probably the root cause of their stratospheric growth over the past few years.

As a testament to their rising status, they recently won a 5-year contract for duplex valve supply to the likes of KOC & Chevron.

4. Kirloskar Brothers Ltd


Operating Revenue Range (FY 2020)


Authorised Capital


Over  INR 500 cr

Public, Listed

INR 50 cr

HQ location - Pune, Maharashtra

Products -

  • Butterfly Valve
  • Sluice/Gate Valve
  • Non Return / Check Valve
  • Globe Valve
  • Air Valve
  • Ball Valve
  • Suction Diffuser
  • Triple Duty Valve

The oldest one on our list, Kirloskar Brothers Ltd is a world-class valve manufacturer based in India.

They are considered a market pioneer in the production of industrial valves and pumps with experience in the designing and manufacturing of fluid management systems.

They specialise in valves sizes ranging from 25 mm to custom 5000 mm sizes, the manufacturing occurs in their dedicated facility at Kirloskarwadi. The Kirloskarwadi hydraulic research centre is also Asia’s largest pump testing facility.

The parent corporation of the multi-billion Kirloskar Group owns them. They are listed on the stock markets too.

5. VIP Valves Pvt Ltd


Operating Revenue Range (FY 2020)


Authorised Capital


INR 1-10 cr

Private, Unlisted

INR 10 Lacs

Location - Ghatkopar (West), Mumbai, Maharashtra

Products -

  • Jacketed Valve
  • Lift Check Valve
  • Motor Operated Valve
  • Pneumatic Actuator Operated Valve
  • Thermodynamic Steam Trap
  • Disc Check Valve Wafer Type
  • Dual Plate Check Valve
  • Foot Valve

A renowned manufacturer of industrial valves, this company was established in 1978.

The company was founded by a technocrat with over 37 years of experience and is currently owned by Dilip Dalal.

With an ethos of solid ethical basis and a strong focus on quality control, their products are renowned for efficiency and long life.


And there you go, your list of top valve manufacturers is ready so you can go ahead with making your favourite pick from among the best valve manufacturers in India.

Do remember that the valve manufacturer you choose will depend on your needs, product specifications and the like. Every manufacturer and their products are suitable for different purposes, and you have to make your own educated choice of the best valve manufacturer in India.

Also Read:
1) Paper Manufacturers In India
2) Clothing Manufacturers In India
3) Battery Manufacturers In India
4) Toy Manufacturers In India
5) Solar Panel Manufacturers In India
6) Plywood Manufacturers In India

Stay updated with new business ideas & business tips with OkCredit blogs in English, Hindi, Malayalam, Marathi & more!
Download OkCredit now & get rid of your bookkeeping hassles.
OkCredit is 100% Made in India.


Q. What are the advantages of forged valves?

Ans. The strength and dependability of a forged valve mean it can withstand high temperatures and pressures with minimum shrinking, porosity, and fractures. This makes them ideal for nuclear, oil and gas, and power generating applications.

Q. What are the use cases for cast valves?

Ans. In circumstances where the level of material integrity is not the primary concern, castings are ideal, especially, when their turnaround time and cost are considered.

They are also more economic in the long-term cost analysis.

Q. How are rising stem gate valves different from non-rising stem gate valves?

Ans. The primary difference between rising-stem gate valves and non-rising-stem gate valves lies in their stem structure.

In rising-stem gate valves, the stem is fixed to the gate disc and does not turn with the operator. The threaded portion of the stem rises above the handwheel when the handwheel is turned because the threads of the stem located above the packing box retract the gate from the flow stream perpendicularly.

But for non-rising-stem gate valves, the stem and the gate disc are threaded through the use of a nut. This means that the gate moves up and down while the stem turns the handwheel.

Q. Which are better, ductile iron valves or cast steel valves?

Ans. The major differences in these ductile iron valves vs cast steel valves questions arise when weldability and abrasion are taken into account.

Famous for its tensile strength and elongation, ductile iron also has higher abrasion tolerance than cast steel and is thus typically used in friction wear mechanisms.

Weldability is better with cast steel, and it is considered to be a superior alternative if structural welding is required on castings.

Q. Who is the largest valve manufacturer in India?

Ans. In India, there are a variety of industrial valve manufacturers. However, Larsen and Toubro are the market leaders in control valve production. For the past fifty years, the firm has built a reputation for producing high-quality valves for a variety of industries.

We hope our article helped you with your research, you can also visit these similar articles as well:
Medical Equipments Manufacturers In IndiaElectric Vehicle Manufacturers In IndiaLithium Battery Manufacturers In IndiaCosmetic Manufacturers In India
Manufacturing Companies In IndiaE Scooter Manufacturers In IndiaLED Light Manufacturers In IndiaCarpet Manufacturers In India